B1288-TRIP/TOGGLE SWITCH PERFORMANCE

For a complete wiring diagram Refer to Section 8W.

When Monitored:
With the ignition on.
Set Condition:
The Instrument Cluster detects the Trip/Toggle Switch active for greater than 20 seconds.

Possible Causes

INSTRUMENT CLUSTER

1.CHECK FOR AN ACTIVE DTC

Does the scan tool display this DTC as active?

Yes

Replace the Instrument Cluster in accordance with the service information.
Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)