TIRE SIZE NOT PROGRAMMED

For a complete wiring diagram Refer to Section 8W.

• When Monitored:

  When the battery is connected.

• Set Condition:

  Tire size is not programmed to a valid size. The default condition for a new BCM is un-programmed. The BCM must be programmed with a valid tire size or the speedometer will default to Zero and this code will set.

Diagnostic Test

• Replace and program the Body Control Module in accordance with the Service Information.
• Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - STANDARD PROCEDURE)

• Test Complete.