RE-INITIALIZATION

NOTE: If for some reason the sunroof is not operating normally it may be necessary to re-initialize the sunroof assembly. This procedure should be attempted prior to any diagnosis of the sunroof system.

NOTE: The re-initialization procedure is not complete if any one of the following conditions occurs before the re-initialization procedure is completed:

• The sunroof switch is not held in the CLOSE position.
• The ignition or battery power is lost.
• The glass panel has not reached its closed position.

NOTE: If the re-initialization procedure is not carried out completely, it must be started over.

The re-initialization procedure is now complete. Operate the sunroof in all directions to verify proper operation.